GS1000-L

Introduction of Guden Machinery GS1000-L Horizontal Directional Drilling Products 1. Cummins turbocharged engine has strong power, stable performance and lower fuel consumption than other engines. 2. Push-pull device is equipped with German Rexroth motor, with simple transmission structure and reliable performance. Push-pull multi-stage speed change, push-pull force increase can reach 1470kN, leading in work efficiency and speed industry. 3. Rotary configuration of French Porkland high-pressure plunger motor, rotary multi-stage speed change, greatly improving work efficiency: 4, the walking speed is up to 5 km/h, and there is no need to load for short-distance transfer. 5. The center of the clamp is low, which not only protects the drill pipe efficiently, but also takes up less space for construction. The front and rear clamps can be separated, and the corresponding clamp blocks can be replaced according to the drill pipe specifications. 6. The main shaft floats, which is beneficial to protect the drill pipe thread. 7. The four-link luffing mechanism is adopted, with large angle range (10~19, good stability; 8. Proportional wire-controlled walking system ensures the safety of equipment and personnel. Drilling rig walking, transfer and loading and unloading are convenient and quick. 9. Gu Deng's patented rotating manipulator automatically slides down the drill pipe without manual unloading, thus saving labor costs. 10. The on-board operation room is large in space, rotatable and equipped with cold and warm air conditioning. 11. The LCD human-computer interaction system can monitor and adjust the equipment status in real time, making the operation easier and more comfortable; 12. The system is equipped with automatic and manual operation modes. Under the automatic operation state, the operating parameters of the drilling rig can be adjusted in time according to the geological conditions, so as to achieve the purpose of protecting the drilling rig. Main parameters Overall dimension 11085X2365X2610 Maximum push-pull force 1000/1500 (force) kN Maximum torque 45000 N-m Maximum push-pull speed 39m/min Maximum slewing speed 110 r/min Engine power 264KW crawler travel speed 3-5km/h